Product Characteristics; Technical Data; General Instructions - Toya Vorel 81791 Manual De Instrucciones

PRODUCT CHARACTERISTICS

The laser distance meter is a device that allows to measure distances with
a laser beam. The measurement is done by means of a straight line. Due
to many functions, direct and indirect measurements can be performed as
well as calculation of area and cubic volume of rooms. Recommended for
indoor use.
CAUTION! This distance meter is not a measuring instrument within the
meaning of the Trade Metrology Act.
Read the entire instructions manual before the fi rst use of the device. The
instructions manual should be kept for further reference.
ACCESSORIES
The product is supplied complete and does not require assembly. Only in-
stalling the batteries is required for the device to function properly.

TECHNICAL DATA

Parameter
Catalogue No.
Measurement range
Distance measurement accuracy
Unit of measure
Laser power
Wavelength
Laser class
Power supply
Operating temperature
Storage temperature
Filter
Weight (without battery)
Protection rating

GENERAL INSTRUCTIONS

Never aim a laser beam at people or animals. Do not stare into laser beam.
The laser is class two and emits a beam of the wavelength and power spec-
ifi ed in the technical data table. Such a beam does not pose a threat, but
aiming it directly at the eyeball may cause eye damage. Do not try to disas-
semble the device yourself, as it could expose you to laser radiation. Do not
modify the device, especially the laser system. Do not use the device in an
environment where the ambient temperature is outside the operating range.
If the instrument is stored in a temperature beyond the operating range,
wait until the instrument within the operating range, before using it. The
product is resistant to water and dust ingress to the extent specifi ed by the
protection degree. Never immerse the product in water or any other liquid.
Do not place the device with other tools in the toolbox. Impacts can damage
the distance meter. Remove the battery or accumulator from the device, if
O R I G I N A L I N S T R U C T I O N S
GB
Unit
81791
[m] 0.05 - 50
[mm]
meters / inches / feet / feet + inches
[mW]
[mm]
[ C]
O
[ C]
O
[mm]
[g]
Value
81794 81795
0.05 - 80 0.05 - 100
±2.0
< 1
620 - 690
2
3 V DC (2 x AAA)
0 ÷ +40
-10 ÷ +50
119 x 49 x 22
60
IP54
11