Braven 105 Guia De Inicio Rapido página 4

NEW DEVICE PAIRING
1. If you'd like to pair BRAVEN 105 to a new
device, long press "O" to turn off speaker.
Once speaker is off, long press "O" until
you hear the speaker power on and hear
the pairing sound.
2. Activate Bluetooth
device you are pairing with (see your
device's instruction manual for information
on activating its Bluetooth
NOTE: Speaker can ONLY go into paring mode
or be put into pairing mode when the speaker is
first turned on.
4
on the phone or
®
settings).
®
ENGLISH
3. Go to your phone or device's Bluetooth
settings and select "BRAVEN 105" from
the list.
4. If asked for a passcode, enter "0000"
5. You will hear a single beep when
BRAVEN 105 is paired with you device.
SPEAKERPHONE
• Press the "O" button to answer a call
over the speaker. Press the "O" button
again to end the call.
Full manual and troubleshooting: braven.com/manuals
®