Ferroli OPERA 70 Instrucciones De Uso, Instalación Y Mantenimiento página 142

Ocultar thumbs Ver también para OPERA 70:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 68
Heating temperature reduction
Access the "Reduction Adjustment Temp" menu to
vary the temperature from a minimum of 0°C to a
maximum of 50°. Confirm with the OK button.
This parameter is used only if time program-
A
ming is activated. See *** 'Time program-
ming' on page 142 ***
DHW temperature adjustment (with optional hot water tank installed)
Access the "Adjustment Temp" menu to vary the
temperature from a minimum of 10°C to a maximum of
65°C. Confirm with the OK button.
B
The boiler comes with the time
program not activated. Therefore,
if requested, this is the setpoint
value.
DHW temperature reduction (with optional hot water tank installed)
Access the "Reduction Adjustment Temp" menu to
vary the temperature from a minimum of 0°C to a
maximum of 50°C. Confirm with the OK button.
This parameter is used only if time program-
A
ming is activated. See *** 'Time program-
ming' on page 142 ***
Time programming
Time programming is done in the same way both for heating and for DHW; the two programs are independent.
To program Heating, access the "Time Program" menu by following the path "USER MENU
Program".
To program DHW, access the "Time Program" menu by following the path "USER MENU
WATER"
"Time Program".
Choose the type of programming to carry out and follow that described below.Select the day (fig. 17) or the interval of
days to program (fig. 18) and confirm with the OK button.
142
fig. 14
cod. 3541R963 - Rev. 00 - 09/2021
CH setpoint reduction
35
to confirm
CH setpoint
65
to confirm
fig. 15
DHW setpoint reduction
25
to confirm
fig. 16
"HEATING"
"DOMESTIC HOT
OPERA
"Time
EN

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Opera 125Opera 160Opera 220Opera 320

Tabla de contenido