Set Up Scales; Operation; Weighing - Seca 376 Manual De Instrucciones Y Garantía

5.2 Set up scales

Spirit level
Air bubble

6. OPERATION

6.1 Weighing

The scales are fully assembled on delivery.
ATTENTION!
Incorrect measurement with force shunt
If the housing of the scales is resting on some-
thing, e.g. a towel, the weight measurement will
not be correct.
− When setting up the scales, ensure that they
only make contact with the ground via the
foot screws.
1. Place the scales on a flat, stable surface.
ATTENTION!
Incorrect measurement without proper
alignment
The spirit level is very delicate. Any additional
weights such as towels will result in improper
alignment of the scales.
− Only align the device without a load.
2. Align the scales by turning the foot screws.
The air bubble in the spirit level must be centred in
the circle.
WARNING!
Serious injury to baby following a fall
Baby scales generally stand on raised work sur-
faces. If the baby falls from this surface, this
may result in serious irreversible or fatal injuries.
− Never leave a baby unsupervised on the
scales.
English
Operation • 43