Power Supply; Setting Up And Aligning The Scales - Seca 764 Manual De Instrucciones Y Garantía

Power supply

The power supply must come from the
supplied AC adaptor.
The connector for the AC adaptor is locat-
ed under the rod.
Please use only the mains unit sup-
plied or mains units from the seca
range of accessories. Before plugging
the unit into the socket, check wheth-
er the mains voltage marked on the
mains unit matches local mains volt-
age.

4. Setting up and aligning the scales

– Place the scales on a level surface.
– Align the scales by screwing the foot
screws. The air bubble in the spirit level
must be right in the centre of the circle .
The scales must stand securely on the
floor on all four feet.
Important!
The alignment of the base of the scale
must be checked and corrected if
necessary every time the location of
the scale is changed.
20