Specifications - HEIDENHAIN MSE 1350 Instrucciones De Instalación

4. Specifications

The MSE 1000 is an advanced system for performing production integrated
measurements at high levels of precision and accuracy. The modules described in these
instructions are designed for indoor use only. The MSE 1000 components shall only be
installed as described in these instructions. Mounting, installation and maintenance are to
be performed by qualified personnel only.
1)
Power consumption
Data transfer
Addressing
Operating temperature 0 °C ... 45 °C
Storage temperature
Relative humidity
Altitude
Degree of protection
Overvoltage category
Pollution degree
Mass
1)
Power requirement of the module. Connected transducers must be considered
additionally.
Notice
Refer to the MSE 1000 Product Information (ID 736907-xx) for power
consumption calculation examples.
MSE 1358
747514-0x
4.6 W
Standard Ethernet, IEEE 802.3
Fixed IP address or DHCP
-20 °C ... 70 °C
† 80 %
† 2000 m
IP65
II, intended to be supplied from the building wiring
2
620 g
18