RS Pro RS HS-608 Manual De Instrucciones página 2

1.Introduction
RS PRO HS-608 Professional True RMS Industrial Digital Multimeter with oscilloscope functions
and TFT color LCD display, providing fast A/D conver ting sampling time, high accuracy, built-in
datalogging and Trend Capture features. It can trace any interupted problems, It has bluetooth
technology for data transfer and is IP67 protected.
This meter measures AC/DC Voltage, AC/DC Current, Resistance,Capacitance,Frequency
(electrical & electronic), Duty Cycle, Diode Test, Insulation Test,and Continuity plus Thermocouple
Temperature. It can store and recall data. It features a waterproof, rugged design for heavy duty
use.Proper use and care of this meter will provide many years of reliable service.
2.Safety
This symbol adjacent to another symbol, terminal or operating device indicates that the
operator must refer to an explanation in the Operating Instructions to avoid personal injury
or damage to the meter.
WARNING This WARNING symbol indicates a potentially hazardous situation, which if not
avoided, could result in death or serious injury.
CAUTION This CAUTION symbol indicates a potentially hazardous situation, which if not
avoided, may result damage to the product.
This symbol advises the user that the terminal(s) so marked must not be connected to a
MAX
circuit point at which the voltage with respect to earth ground exceeds (in this case) 1000
VAC or VDC.
This symbol adjacent to one or more terminals identifies them as being associated with
ranges that may, in normal use, be subjected to particularly hazardous voltages. For
maximum safety, the meter and its test leads should not be handled when these terminals
are energized.
This symbol indicates that a device is protected throughout by double insulation or
reinforced insulation.
PER IEC1010 OVERVOLTAGE INSTALLATION CATEGORY
OVERVOLTAGE CATEGORY I
Equipment of OVERVOLTAGE CATEGORY I is equipment for connection to circuits in which
measures are taken to limit the transient overvoltages to an appropriate low level.
Note – Examples include protected electronic circuits.
13/08/2017 Version No. 001
MeterScope/English
1