Volume Calculations; Indirect Measurement - Testboy TV 600 Instrucciones De Empleo

Volume calculations

Indirect measurement

Indirect measurement is very helpful if the target to be meas-
ured is inaccessible or does not reflect the laser beam well
enough. Using Pythagoras' formula, the distance can be calcu-
lated.
Hypotenuse calculation
TV 600
Press this key to select the volume calculation
function.
This symbol will be shown in the display.
Press this button to obtain the height, width and
depth.
After all three measurements have been taken,
the result is calculated and displayed in the main
display.
The last value obtained is shown in the auxiliary
display.
Press this key to select the indirect measurement
function.
This symbol will be shown in the display. (The bot-
tom cathetus flashes.)
Now press this button to measure the hypotenuse.
The measured value appears in the auxiliary dis-
play.
Press the button again to measure a cathetus.
The measured value appears in the auxiliary dis-
play.
Functions
39