Operation; Function Lock; Mains Operation; Switching On And Off - B.Braun Aesculap VetCare GT 405 Traducción Del Manual Original

4. Operation

4.1 Function lock

When it leaves the factory, the trimmer is protected
against being switched on accidentally. You can activate
this function lock yourself, e.g. for transporting the trim-
mer.
Deactivating function lock:
Place the trimmer in the connected charging unit 8.
The charging indicator 6 lights up. The trimmer is
ready for use.
Mains operation of the trimmer is possible immediately.
Activating function lock:
Press the On/Off switch 3 for about 4 seconds.
Using the On/Off switch now has no effect.
16

4.2 Mains operation

If necessary, e.g. if the rechargeable battery has little or
no charge, you can run the trimmer on mains power.
Insert the mains adapter 10 in a
power socket.
Unplug the plug of power
cable 11 from the charging
unit 8 and plug it into the socket
on the trimmer.

4.3 Switching On and Off

To switch the trimmer on, press
the On/Off switch 3.
To switch the trimmer off, press
the On/Off switch 3 again.