Power Connection - Kärcher BDS 43/150 C Classic Manual Del Usuario

Start up
 The power cord must be checked regu-
larly for damages, such as cracks or ag-
ing. If damage is found, the cable must
be replaced before further use.
 Check appliance for damage, have
damages repaired by customer service.

Power connection

– For connection values, see technical
data and type plate.
– The electrical connections must be
done by an electrician according to IEC
60364-1.
DANGER
Risk of electric shock.
– Do not drive over the mains cable.
DANGER
Risk of injury!
– Never wrap the mains cable around
your body or your neck.
– Do not let the mains cable come in con-
tact with the rotating brushes or rotating
pads.
Attach the brush/pad
Note:
Please select the correct accessory for
your cleaning task.
 Disconnect the mains plug from the
socket.
 Pull the lever for level adjustment.
 Swivel the handle to the front into a ver-
tical position.
 Release the lever for level adjustment.
 Tilt the appliance rearward.
 Place the disc brush/driver plate onto
the actuator and turn in anti-clockwise
direction.
Fill the detergent tank (option)
WARNING
Risk of damage. Only use the recommend-
ed detergents. With other detergents, the
operator bears the increased risk regarding
the operational safety and danger of acci-
dent.
Only use detergents that are free from sol-
vents, hydrochloric acid and hydrofluoric
acid.
Follow the safety instructions for using de-
tergents.
 Fill detergent solution into the detergent
tank.
WARNING
Risk of injury! The operation of the appli-
ance requires practice.
– Ensure that there are no obstacles in
the area to be cleaned.
– Check the floor consistency for its suit-
ability.
– The handling becomes more difficult
with uneven or rough surfaces.
Adjust the working position of the
WARNING
Risk of accident due to loss of control over
the appliance. Do not adjust the handle un-
less the motor is at a standstill.
 Pull the lever for level adjustment.
 Swivel the handle into a comfortable
position.
 Release the lever for level adjustment.
Select brush speed (BDS 43/Duo C
WARNING
Risk of accident due to loss of control over
the appliance. Only operate the switch for
the brush speed when the motor is at a
standstill.
EN – 3
Operation
handle
only)
11