pico Technology 2000 Serie Guía Rápida De Inicio página 8

PicoScope 2000 Series Oscilloscopes and MSOs
WARNING
To prevent injury or death, do not use the product if it appears to be
damaged in any way, and stop use immediately if you are concerned by any
abnormal operations.
WARNING
When cleaning the oscilloscope, use a soft cloth and a solution of mild soap
or detergent in water. To prevent electric shock, do not allow water to enter
the casing, as this will compromise the electronics or insulation inside.
CAUTION
Do not tamper with or disassemble the oscilloscope, connectors or
accessories. Internal damage will affect performance.
3 Contents
Please check that your PicoScope PC Oscilloscope package contains:
• PicoScope PC oscilloscope
• PicoScope software and reference disk
• USB cable
Some product packs and scope bundles may contain additional items. See the
PicoScope 2000 Series Data Sheet for a full contents list.
4 System requirements
To ensure that PicoScope operates correctly, you must use a computer with the system
requirements shown in the table below. The performance of the oscilloscope will
improve with a more powerful PC, and will benefit from a multi-core processor.
Operating
system
Processor,
Memory,
Free disk space
Ports
† PicoScope oscilloscopes will operate slowly on a USB 1.1 port. Not recommended.
4
Microsoft Windows 7, 8, 8.1 (not Windows RT) and 10.
Linux and OS X (PicoScope beta software).
As required by the operating system
One free USB 1.1†, 2.0 or USB 3.0 port
Copyright © 2006–2016 Pico Technology Ltd. All rights reserved.
Specifications
32-bit and 64-bit versions
Quick Start Guide
DO231-5