Grizzly AHS 1845 T Lion Traducción Del Manual De Instrucciones Original página 26

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 72
GB
cidentaIly.
Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to oper-
ate the power tool. Power tools are
dangerous in the hands of untrained
users.
Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less Iikely to
bind and are easier to control.
Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed. Use
of the power tool for operations differ-
ent from those intended could result in
a hazardous situation.
Carefully inspect the area to be cut
and remove all wires or other foreign
bodies.
Hold the power tool by insulated grip-
ping surfaces only, because the cutter
blade may contact hidden wiring or its
own cord.
Careful handling and use of battery
devices.
Charge the batteries only in charg-
ers that are recommended by the
manufacturer. Risk of fire if a charger
that is suitable for a specific type of bat-
tery is used with other batteries.
In the power tools, use only the bat-
26
teries designed for the purpose. The
use of other batteries may result in inju-
ries and risk of fire.
Keep the unused battery away
from paper clips, coins, keys, nails,
screws and other small metal ob-
jects, which could cause bridging of
the contacts. A short circuit between
the battery contacts may cause burns
or fire.
If used incorrectly, liquid may leak
from the battery. Avoid contact with
this. In the event of accidental con-
tact, rinse off with water. If the liquid
gets into eyes, seek medical assistance.
Leaking battery fluid may cause skin ir-
ritations or burns.
Service
Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
Special safety directions for battery-
operated tools
Ensure that the device is switched
off before inserting the battery. In-
serting a battery into a power tool that
is switched on may result in accidents.
Recharge the batteries indoors only
because the battery charger is de-
signed for indoor use only.
To reduce the electric shock hazard,
unplug the battery charger from the
mains before cleaning the charger.
Do not subject the battery to strong
sunlight over long periods and do
not leave it on a heater. Heat dam-
ages the battery and there is a risk of
explosion.
Allow a hot battery to cool before

Publicidad

Tabla de contenido
loading

Tabla de contenido