Battery Replacement - Tripp-Lite SmartPro 1U Serie El Manual Del Propietario

Battery Replacement

Under normal conditions, the original batteries in your UPS will last many years. See "Safety"
section before replacing batteries. The batteries are designed for hot-swap replacement
(i.e. leaving the UPS in ON mode), but qualified service personnel may wish to put the UPS in
the OFF mode before proceeding.
Procedure
Remove Front Panel
1
Disconnect Batteries
2
Remove/Dispose of Batteries
3
Add Batteries
4
Connect Batteries
5
Attach connectors: black-to-black and red-to-red.
Replace Front Panel
6
REMOVE / REPLACE FRONT PANEL
DISCONNECT / CONNECT BATTERIES
11
PULL / PUSH