Technical Specifications; Care And Maintenance - Hudora 76896 Instrucciones Montaje Y De Uso

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING YOUR PRODUCT!
Please read these instructions carefully. The instructions are an integral part of the pro-
duct. Therefore, please store them and the packaging carefully in case questions arise in
the future. Please always include these instructions when you are handing on the product
to a third-party. Children should only assemble or use the product when they are under
adult supervision. This product is not designed for industrial use. Use the product for its
intended purpose only.

TECHNICAL SPECIFICATIONS

Item: Kick It football goal
Item: 76896
Dimensions when assembled: 213 x 152 x 76 cm
If you have assembly problems or would like further information on the product, we have
all you need and more at http://www.hudora.de/artnr/76896/.
USER TIPS
• Only set up the goal on level ground
• Prior to use, check all parts of the goal for damages and correct assembly. In this
regard, it is important to check the connecting elements and screw connection for
stability and fit. Any sharp edges that might have formed must immediately be remo-
ved!
• Please keep a minimum distance of at least 3 m to any surrounding obstacles.
• Secure the goal to keep it from toppling over – even if not in use.
• For repairs, please only use original parts
• Warning: do not climb on the goal frame or net or hang from the goal posts. There is a
serious risk of injury!
• Avoid exposing the product unnecessarily to bad weather conditions. Keep it in a cool
and dry storage area.
• Check for any rust on the product and remove it immediately. Pushing together the
metal parts could lead to the protective layer being scratched and rust developing.
ASSEMBLY INSTRUCTION
Hinweis: Lubricate the connection assemblies on the narrow ends a bit before starting
the assembly. That facilitates the assembly and extends the durability of the product!
1. Assembly of the goal frame
Assemble the goal frame as indicated in fig. 1. Observe that you use the respectively
numbered tubes.
2. Assembly of the goal net
Spread the net straight at the back of the frame. Fasten the net on the frame by threading
the pull-through cord as indicated in illustration 2 around the bars and knotting the loose
ends with the frame.
3. Assembly of the goal wall
Spread the goal wall and fasten it on the crossbar and the sides of the goal frame by
means of the Velcro(R) fasteners; secure then with pegs the bottom line on the ground.
4. Stand locking of the goal
Finally fix the goal frame by means of the pegs on the ground. Ascertain that the ground
is suitable for the application of pegs (e.g. no water pipes for sprinkler devices!). Make
sure that the pegs are completely driven into the ground and have firm position. Avoid
protruding fastenings (risk of stumbling). On too hard grounds the goal must be saved
by appropriate measures in another way against overturning in order to prevent risk of
injuries (e.g. with slabs or sandbags). Never play with an unsecured goal or never leave
the goal unsecured respectively.
No liability is assumed for damages resulting from incorrect application of the instruction
manual.

CARE AND MAINTENANCE

Use a dry or damp cloth only to clean the product; do not use special cleaning agents!
Check the product for damage or traces of wear and tear before and after each use. Store
the product in a safe place where it is protected from the elements, cannot be damaged,
and cannot injure anyone. For your own safety, please use original spare parts only. These
can be sourced from HUDORA. Do not make any structural changes. If parts become dama-
ged or if sharp edges or corners should develop, the product may not be used any more. If
in any doubt, please contact our service team (http://www.hudora.de/service/).
Fig. 1
Fig. 2
Fig. 3
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection point pro-
vided in your area. Local waste management companies will be able to answer your ques-
tions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we put just
as much effort into rectifying them. Therefore, you can fi nd numerous information on the
product, replacement parts, solutions to problems and lost assembly manuals at http://
www.hudora.de/artnr/76896/.
SPARE PARTS AND ORIGINAL ACCESSORIES AVAILABLE AT:
http://www.hudora.de/artnr/76896/
HUDORA | Jägerwald 13 | 42897 Remscheid | Germany
www.hudora.de
Item no. 76896
As of 09/10
Page 2/6