Beurer BY 90 Instrucciones De Uso página 18

9� This baby scale has a 'HOLD' function (AUTO HOLD and MECHANICAL HOLD)� The AUTO
HOLD function (which is activated as standard) establishes the baby's weight on the display
as soon as they are still enough to achieve an exact measured value� If the baby is moving
around vigorously, their weight cannot be recorded� Therefore, try to calm the wriggling baby
to achieve a rapid measurement, but do not touch the baby, as this will affect the weight
measurement� As soon as the baby's weight is established on the display, the word 'HOLD'
stops flashing and the weight is displayed for 120 seconds�
Note: If the weight cannot be determined automatically after 8 seconds, the baby scale
averages the weight over 4 seconds (flashing display of the weight on the baby scale display)�
10� The weight is saved on the baby scale and it switches off automatically after 120 seconds�
To switch off the scale manually, press and hold the ON/OFF/TARE button
11� If the baby is wriggling about too vigorously, you can select the MECHANICAL HOLD
function by pressing the HOLD button� After 5 seconds, the word 'HOLD' stops flashing
and the averaged weight is displayed for 120 seconds�
12� To transfer the measured weight to the app, open the app and press the Bluetooth
after the measurement has successfully been taken�
13� The baby scale automatically switches off once the transfer has been completed successfully�
Initial use without the app
We recommend using the "beurer BabyCare" app for the initial use and implementing all
settings (see "Initial use with the app" section)�
Note: Measurements that are saved on the baby scale without it having been previously
synchronised with the app cannot be transferred�
1� Place the baby scale on an even, hard surface; a hard surface is crucial for correct
measurement�
2� Press the ON/OFF/TARE button
display for 120 seconds� Press any button to use the baby scale without the app�
3� As soon as "0,000 kg" appears on the display, the baby scale is ready to take measurements�
4� Now place the baby on the weighing surface� Do this very carefully; do not let the baby fall
and take particular care with the baby's head�
5� The weight is displayed for 120 seconds and then it switches off automatically� Press the
ON/OFF/TARE button
press and hold the ON/OFF/TARE button
Subsequent synchronisation with the app
If you have not synchronised the baby scale with the "beurer BabyCare" app during initial
use, you can also do this later�
1� Press the ON/OFF/TARE button
2� "App" flashes on the display of the baby scale for 10 seconds� If the app is open, the baby
scale can be connected for 10 seconds�
Alternatively:
Press the Bluetooth
the baby scale can be connected for 120 seconds�
3� The baby scale is successfully connected to the app once the Bluetooth® symbol
illuminates permanently in the display�
to switch on the baby scale� "app" flashes on the
to take another measurement� To switch off the scale manually,
to switch on the baby scale�
button whilst the baby scale is in operation� If the app is open,
®
for 3 seconds�
18
for 3 seconds�
button
®