Leister TRIAC BT Manual Del Usuario página 8

Please read operating instructions carefully before useand
keep for future referen
Warning
DANGER! Danger when opening up the tool, as live components and connections
are exposed. Therefore, before opening it, unplug the tool to ensure disconnection
from the mains.
Incorrect use of the hand extruder (eg overheating of the material) can present
a fire and explosion hazard, especially near combus t ible materials and
explosive gases.
Do not touch the element housing, air nozzle and discharging plastizised
material when they are hot as they can cause burns. Let the tool cool
down. Do not point the hot air flow and the discharg ing plastizised mate-
rial in the direction of people or animals.
Caution
120
The voltage rating stated on the tool must correspond to the mains voltage.
230
For personal protection on building sites we strongly recommend the tool be
FI
connected to a RCCB (Residual Current Circuit Breaker) .
The tool must be operated under supervision. Heat can ignite flammable
materials which are not in view.The machine may only be used by qualified
specialists or under their supervision. Children are not authorized to use
this machine.
Protect tool from damp and wet. For indoor use only!
Repairs should only be carried out by authorized Leister service points.
Restricted to use with original Leister accessories and replacement parts.
8
Translation of the Original User Manual
Warranty
• For this tool, we generally provide a warranty of one (1) year from the date of purchase
(verified by invoice or delivery document). Damage that has occurred will be corrected
by replacement or repair. Heating elements are excluded from this warranty.
• Additional claims shall be excluded, subject to statutory regulations.
• Damage caused by normal wear, overloading or improper handling is excluded from
the guarantee.
• Guarantee claims will be rejected for tools that have been altered or changed by the
purchaser.
Conformity
Leister Process Technologies, Galileo-Strasse 10, 6056 Kaegiswil/Switzerland,
confirms that this product, in the version as brought into circulation through us,
fulfils the requirements of the following EC directives.
Directives
Harmonized Standards
Kaegiswil, 07.02.2011
Bruno von Wyl,
Disposal
: 2006/42, 2004/108, 2006/95
: EN 12100-1, EN 12100-2, EN 60204-1, EN 14121-1,
EN 55014-1, EN 55014-2, EN 50366, EN 62233,
EN 61000-3-2, EN 61000-3-3, EN 60335-2-45
Technical Director
Power tools, accessories and packaging should be sorted for environmental-friendly
recycling. Only for EC countries: Do not dispose of power tools into household
waste! According to the European Directive 2002/96/EC on waste electrical and
electronic equipment and its incorporation into national law, power tools that are
no longer suitable for use must be separately collected and sent for recovery in an
environmental-friendly manner.
Christiane Leister, Owner