Defi Nitions: Safety Guidelines; Ec Declaration Of Conformity - DeWalt DCD920 Traducido De Las Instrucciones Originales

EN GLI SH
Vibration emission value a
h
Screwdriving
a =
h,D
Uncertainty K =
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
Battery pack
Battery type
Voltage V
DC
Capacity A
h
Weight kg
Charger
Mains voltage V
AC
Battery type
Approx. charging time min
Weight kg
Fuses:
Europe 230 V tools
U.K. & Ireland 230 V tools
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
34
m/s² < 2.5 < 2.5
m/s² 1.5 1.5
DE9180 DE9503
Li-Ion NiMH
18 18
2.0 2.6
0.68 1.0
DE9135
230
NiCd/NiMH/Li-Ion
40
(2.0 Ah battery packs)
0.52
10 Amperes, mains
3 Amperes, in plugs
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DCD925, DCD920, DCD935, DCD930, DCD945, DCD940
D WALT declares that these products described
E
under Technical Data are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-1,
EN 60745-2-2.
< 2.5 < 2.5
1.5 1.5
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
DE9140 DE9502
Li-Ion NiMH
14.4 14.4
2.0 2.6
0.58 0.86
DE9116
230
NiCd/NiMH
60
(2.0 Ah battery packs)
0.4
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
< 2.5 < 2.5
1.5 1.5
DE9501
NiMH
12
2.6
0.69