Getting Started; Batteries; Change Settings; Table Stand Or Wall Mount - Oregon Scientific RAR621 Manual Del Usuario

GETTING STARTED

BATTERIES

Batteries are supplied with this product:
Main unit 2 x UM-4 (AAA) 1.5V batteries
Remote unit 2 x UM-4 (AAA) 1.5V batteries
NOTE It is recommended that you use alkaline
batteries with this product for longer performance.
Insert batteries before first use, matching the polarity
(+ and -) as shown in the battery compartment. For best
results, install batteries in the remote sensor before the
main unit. Press RESET after each battery change.
shows when batteries are low.
Installing the Batteries
Do not use rechargeable batteries.
NOTE
UNIT
Main
Remote

CHANGE SETTINGS

To change, time, calendar and language settings:
1. Press and hold MODE for 2 seconds to enter setting
mode.
2. Press or to change settings. (To reach the
setting you want quickly, press and hold
3. Press MODE to confirm.

TABLE STAND OR WALL MOUNT

Use the stand on the back of the main unit / remote
sensor, or mount it on a wall with a nail.
Attaching the Table Stand
7
LOCATION
Indoor Temperature
Area
Outdoor Temperature
Area
or ).