Setting Tags; Jumping To Tags; Finishing The Recording; Music/Image/Movie Management - TechniSat DiGYBOXX HD CX Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 152

8.3.2.6 Setting tags

> Jump to the point where the tag should be set.
> Press the Record button in order to place the tag at the current point. In this way
you are able to set tags in all chosen points of the recording.

8.3.2.7 Jumping to tags

There is a possibility to jump directly to the point in the recording where the
tag is placed.
> After pressing the Options button, the window with available tags will be opened.
Additionally, the "Current" tag appears, which marks the current point
of recording.
> After selecting the tag with the up/down arrows, the playback starts from this point.
> After pressing the OK button, the window is closed and the device is switched to the
normal playback mode.

8.3.2.8 Finishing the recording

> Press the Stop button in order to fi nish playing.
Playing is now fi nished and the receiver is switched into the normal mode. The receiver
"marks" the point where the playback has been fi nished. If playback is started again, it is resumed from
the point where it has been previously stopped.

8.4 Music/image/movie management

> Open the main menu with the menu button.
> Using the up/down arrows, select the Manage music/
images/movies line.
> Confi rm by pressing OK.
The Manage music/images/movies menu appears.
> Using the up/down arrows you are able to move the cursor in the menu and
change individual items, as stated.

8.4.1 Managing own recordings

In this menu, there is a possibility to manage your own recordings.
> Press OK in order to move into the Manage your own recording submenu.
The list with available (on carriers) recordings appears.
> Mark chosen recording by using the up/down arrows.

8.4.1.1 Removing

> Press the red Remove button in order to delete marked recording.
> In order to remove the recording, select (using the up/down arrows) the OK fi eld and confi rm by
pressing OK.

8.4.1.2 Parental control

You can block any recordings that are not for children and youth. These recordings
are able to be played only after entering the four-digit PIN code of the device.
82

Publicidad

Tabla de contenido
loading

Productos relacionados para TechniSat DiGYBOXX HD CX

Tabla de contenido