Descargar Imprimir esta página
HIKVISION DS-PD1-P10P Manual De Instrucciones
HIKVISION DS-PD1-P10P Manual De Instrucciones

HIKVISION DS-PD1-P10P Manual De Instrucciones

Publicidad

Enlaces rápidos

DS-PD1-P10P
10m Digi-logic Pet Immune Detector
EN50131-2-2:2008
EN50131-1:2006+A1:2009
Security Grade (SG) 2
Environmental Class (EC) II
This product and - if applicable - the supplied
accessories too are marked with "CE" and
comply therefore with the applicable
harmonized European standards listed under
2011/65/EU.
For electrical products sold within the European
Community. At the end of the electrical products
life, it should not be disposed of with household
with your local Authority or retailer for recycling
advice in your country.
Op cal and Range Features
Volumetric Coverage
90 degree, 78 zones and 5 planes
Maximum Range
10m
Op mal Installa on Height
1.8-2.4m
Key Features
Animal Immune
Up to 10kg
Digi Logic Technology
Yes
Adjustable Sensi vity
Yes
Tamper Protec on
Yes
Electrical Features
Opera ng Voltage
9 - 16 VDC
Quiescent Current Consump on
15mA at 12 VDC
Relay Outputs
SELV limits, 60 VDC, 50mA (42.4Vac peak)
Tamper Switch
12 VDC 50 mA
Other Details
Opera ng Temperature
-10 °C to 40 °
Weight
58g
Dimensions(H x W x D)
82 × 50 × 41 mm
!
The Input voltage should meet both the SELV (Safety Extra Low Voltage) and
the Limited Power Source according to the IEC60950-1 standard. Please refer
to technical speci cations for detailed information.
1
< 1.8
1.8-2.4m
3m
3m
> 2.4m
2m
2m
1m
1m
<10kg
>10kg
1.8-2.4m
1m
2m
4m
6m
8m
10m
8m
6m
Volumetric 90˚
78 Zone Edges
4m
5 Planes
2m
2
*BRACKET supplied separately
2.1
3
Wiring Diagram
Double pole
Double end of line
3.1
3.2
+12V DC
INPUT
+12V DC
INPUT
TAMPER
+
-
+
-
EOL
Hangzhou Hikvision Digital Technology CO.,Ltd.
4
False Alarm Hazards
4.1
Use solid wall for moun ng
5
COM
EOL
5.1
5.2
PC1
PC2
Pulse Count 1
Pulse Count 2
(default)
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
1.8 - 2.4m
3m
2m
230V
1m
6
Alarm LED
ON
OFF
Tamper
5.3
Pet

Publicidad

loading

Resumen de contenidos para HIKVISION DS-PD1-P10P

  • Página 1 The Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source according to the IEC60950-1 standard. Please refer to technical speci cations for detailed information. Pulse Count 1 Pulse Count 2 (default) Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China...
  • Página 2 Class B digital device, pursuant to part 15 of the используйте вибрирующие поверхности. Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user 5. Параметры чувствительности. ВКЛ/ВЫКЛ индикатора тревоги. Датчик FCC Rules. These limits are designed to provide reasonable protection manual (hereinafter referred to be “the Manual”) cannot be reproduced,...