Atlas Copco G2417-S180 Manual Del Usuario página 13

G2417-S180
Brand
Mobil
Klüber Lub.
Texaco
Molykote
Lubrication
For flexible spindle extension – When fitting the extended spindle – apply 0.5
3
cm (0.03 cu in) of grease type "Lubricating Engineers LE3752" (or EP grease)
at the bottom of the hole in the collet holder.
Dismantling/Assembling instructions
Instructions for vane motor
WARNING Polymer hazard
The vanes in this product contain PTFE (a synthetic fluoropolymer). Due to
wear, PTFE particles might be present inside the product. If heated PTFE
can produce fumes which may cause polymer fume fever with flu-like symp-
toms, especially when smoking contaminated tobacco.
Health and Safety recommendations for PTFE must be followed when han-
dling vanes and other components:
Do not smoke when servicing this product
►
PTFE-particles must not come in contact with open fire, glow or heat
►
Motor components must be washed with cleaning fluid and not blown
►
clear with an air line
Wash your hands before commencing any other activity
►
Dismantling
Service tools are also included in the Basic Service Tools set. For further infor-
mation see ordering No. 9835 5485 00
Ordering No.
4080 0182 01
4080 0182 02
4080 0182 03
EN
General purpose, Bearings and Gears
Mobilegrease XHP 222 NLG 2
Klübersynth UH 1 14-151
Multifak EP2
BR2 Plus
Ø D
7
8
9
© Atlas Copco Industrial Technique AB - 9836 9904
Ø C
3.5
4.5
5.5
Service
13