Deactivating The Travel Lock; Cleaning - Philips Norelco 7000 Serie Manual De Instrucciones

ENGLISH
26

Deactivating the travel lock

1 Press the ON/OFF button for 3 seconds.
C
2 The lock symbol blinks and then lights up
continuously. The shaver is now ready for
use.
The shaver unlocks automatically when charging in
B
the SmartClean System.

Cleaning

◗ Always clean your shaver after each use.
◗ Regular cleaning guarantees better shaving
results.
◗ Never clean, remove or replace shaving unit
while motor is on.
◗ Do not apply pressure to shaving head combs.
Do not touch shaving heads with hard objects
as this may dent or damage precision-made
slotted combs.
◗ Do not use shaver if shaving head combs are
damaged or broken. Facial injury may occur.
◗ Do not use abrasives, scourers or aggressive
liquids such as gasoline or acetone to clean
the shaver.
Cleaning the Shaving Unit
The shaving heads may be quickly cleaned after
each use by rinsing with hot water. Water from
the tap should be on a hot setting, BUT BE
CAREFUL TO TEST WATER FIRST SO AS NOT
TO BURN OR SCALD HANDS.
◗ Regular cleaning guarantees better shaving
results.
◗ While rinsing shaving heads, water may drip
out of the base of shaver. This is a normal
occurrence.
C
1 For best results rinse the shaving unit by
running under hot water for a few minutes.
C
2 Pull the top portion of the shaving unit
straight off the shaver.
C
3 Rinse the shaving unit under hot tap water.
BE CAREFUL TO TEST WATER FIRST SO AS
NOT TO BURN OR SCALD HANDS.
ENGLISH
27