Activating The Travel Lock; Deactivating The Travel Lock - Philips HQ9170CC Manual Del Usuario

activating the travel lock

Press the on/off button for 3 seconds to enter
,
the travel lock mode (indicated by a rotating key
symbol).
Wait a few seconds without pressing the on/off
,
button to activate the travel lock.
The motor switches off and the key symbol is
,
visible on the display to indicate that the travel
lock has been activated.
Note: if you press the on/off button again within a few
seconds after entering the travel lock mode, the travel
lock will not be activated. Instead, you will have entered
one of the two display layout modes. If you want to
return to the travel lock mode, press the on/off button
two more times until you are back in the travel lock
mode (indicated by a rotating key symbol). Then wait
a few seconds without pressing the on/off button to
activate the travel lock.
You can always return to the menu by pressing
,
the on/off button for 3 seconds.

Deactivating the travel lock

Press the on/off button for 3 seconds.
,
The motor starts running to indicate that the shaver
has been unlocked. The shaver is now ready for use
again.
replacement
Replace the shaving heads when the shaving unit
symbol appears on the display.
Replace damaged or worn shaving heads with HQ9
Philips Shaving Heads only.
1 Switch the shaver off, remove the powerplug
from the wall socket and pull the appliance plug
out of the shaver.
EnglisH
1