Chapter 3. Software Cd-Rom; Starting Up The Main Menu Of The Software Cd-Rom - Sanyo POA-WL11 Operación Manual

Chapter 3.

Chapter 3. Software CD-ROM

This chapter describes how to operate the software CD-ROM for Wireless Imager.
This software CD-ROM includes all the softwares necessary to operate Wireless Imager.
[Included software]
•WI Set Software used to configure TCP/IP settings (such as IP address) for Wireless Imager.
•WI Client Software used to transfer the screens from the personal computer to Wireless Imager.
You can also use PJ Controller feature to configure settings in the projector.
[NOTE] The software applications included in this CD-ROM can be used only when you agree to
the contents of "Software license" in the CD-ROM.

3.1. Starting up the main menu of the software CD-ROM

1. Set the software CD-ROM in the CD-ROM drive of the personal computer.
2. CD-ROM will start automatically and display Language Selection window. Select the language from
the pull-down menu and press OK button.
[NOTE] If the "Language Selection" screen does not appear automatically, open [CD-ROM drive]
of [My Computer] of the personal computer and run "AutoRun.exe". The "Language
Selection" screen will appear.
3. "Software License" window will be displayed.
Thoroughly read the contents. If you agree to the contents of the software license agreement, check
on the [Agree] radio button and click [OK].
Software CD-ROM
— 20 —