Chapter 6. Apprendix; Controlling Mouse Movement With Remote Control - Sanyo POA-WL11 Operación Manual

Chapter 6.
Chapter 6. Appendix

6.1. Controlling Mouse Movement with Remote Control

You can use a remote control unit* of the projector as a wireless mouse for your PC to use it as a
pointer.
[NOTE] When using Wireless Imager, you do not need a mouse control cable to connect between
PC's mouse port (or USB port) and the projector's Control Port terminal (or USB
terminal).
✽
Remote control unit should have Mouse operation functions.
For the detail, refer to the projector Owner's Manual.
[Moving Mouse Pointer]
Use [Point button], [SELECT (left click) button], and [Right Click button] to control the mouse pointer.
● Point button
Use this button to move the mouse pointer. You can
move the mouse pointer by pressing the Point button
vertically and horizontally.
[NOTE] While the projector's menu is displayed
on the screen, the Point button serves
as a pointer for the menu screen.
When the Menu screen is closed, you
can control the mouse pointer again.
● SELECT (Left Click) button
Functions as PC's left-mouse button click.
To drag the pointer, keep pressing SELECT (Left Click)
button and move the Point button.
● Right Click button
Functions as PC's right-mouse button click.
Appendix
Point Button (Pointer will move)
SELECT (Left Click) button
(Left mouse button click)
— 64 —
Right Click button
(Right mouse button click)