HIKVISION DS-PD2-T10P-WEH Manual De Instrucciones

DS-PD2-T10P-WEH
Wireless 10m Pet Immune PIR Detector
UD09719B-A
E N G L I S H
Diagram References
1
PCB Overview
2
LED Indications
3 Microwave Adjustment:0m to 15m
4
Dip Switched 1-4
5
Registration
Register Locally
Note: The distance between the security control panel and the detector
should be less than 50 cm.
Initialize the Detector
Register Via APP
1. Log in to the APP Store and input "Hik-Connect" to search the mobile client.
Download and install Hik-Connect to your phone.
3. Power on the security control panel.
4. Log in the Hik-Connect and tap the icon "+" at the upper-right coner of the
Hik-Connect page to add the security control panel. You can scan the QR code
on the device rear panel or on the package box, or on the package box, or
input the device serial No. manually to add the device when the device is in
6 Signal Strength Test
7 Inserting the Fixed Mask or Flexible Mask
8 Flexible Mask Adjustment(1)
9
Flexible Mask Adjustment(2)
10 10m Lens Diagram
11 Wall Mounting Bracket ＆ Adapter
12
Wall Mounting Bracket
13 Fixed Bracket
14 Guidelines
Technical Specification
10m
90°
78 zones and 5 planes
0.25–3m/s
1.8-2.4m
Two-way Wireless Technology Yes
Blue Wave Technology Yes
Dual Element Pyroelectric Sensor Yes
Front, rear, and bracket tamper signal input
Intergrated Walk Test Buzzer Yes
Top: Microwave, PIR 1 and alarm
Signal Strength Indicators (SSI) Yes
3 Microwave Frequencies to Avoid Interference Yes
Yes
Polycarbonate
Animal Immunity
10kg
Sealed
High or low range
0.4mm HDPE in lens area
Lens UV compensated
Sensor
2 low noise dual element passive infrared sensors and a microwave doppler unit
Weatherproof IP55 rated
-25℃ ~ +60℃
Physical Dimensions(H x W x D) 180mm x 80mm x 105mm
Weight 500g
Transmission Frequency 433MHz, FM transceiver
Range in Open Space 800m
Accessories
Rotatable Wall Mounted
Fixed Wall Mounted
Ceiling Mounted
for safety reasons, having limited output current.
1
3
4
11 12
3
11 12 13
4
2
5