Safety Instructions; Maintenance And Service - Soehnle 9202 Manual De Usuario

3. General information

3.3 Safety Instructions

Before putting the appliance into use, please read with care the information given in the Operating Instruc-
tions. They contain important instructions for installation, proper use and maintenance of the appliance.
The manufacturer shall not be liable for damages arising out of failure to heed the following instructions:
When using electrical components under increased safety requirements, always comply with the
f
appropriate regulations . Never perform work on the appliance while the power is switched on .
Improper installation will render the warranty null and void. Ensure the voltage marked on the power
f
supply unit matches your mains power supply.
The device is designed for use within buildings . Observe the permissible ambient temperatures for
f
use (Technical Information).
The device meets the requirements for electromagnetic compatibility. Do not exceed the maximum
f
values specified in the applicable standards.
If you have any problems, contact your local Soehnle Industrial Solutions service partner.
Interference suppression of the unit corresponds to the valid EU directive 2014/30/EU. The display value
may be influenced by extreme electrostable and electro-magnetic interference, e.g. operation of a radio
unit or a mobile phone in the immediate vicinity of the unit.
When the electrostable interference is no longer present, the unit can again be used for its intended purpose .
You may need to switch it on again. If there is permanent electrostable interference, we recommend earthing
the platform .
The unit is a measuring instrument . Air currents, vibrations, rapid changes in temperature and direct sun-
light may have an effect on the accuracy of the scale.
The scale is protected to IP 54 protection class. Therefore, avoid high levels of humidity, vapours,
aggressive liquid media and strong contamination .
3.4 Cleaning
It is sufficient to clean the scale with a moist cloth and a regular cleaning agent. Do not use any scourers.

3.5 Maintenance and service

The scale does not require any routine maintenance. However, we recommend to check the scale's accura-
cy at regular intervals. The regularity of these checks is dependent on the level of use and the state of the
scale. If any inaccuracies occur, please contact your local dealer or Soehnle Industrial Solutions service
partner .
11