Safety Information - Soehnle 7702 Instrucciones De Uso

Only to be used by trained personnel. It is not designed to be used by the patient.
4.3 Classification
Class I medical device with measurement function.
Electrical protection class II (insulation protected, without earth conductor).
The medical product is a Type B applied part and designed to come into direct
contact with the patient. The discharge currents correspond with the classification
of Type B applied parts.
EN60529 protection from water ingress: the whole device has IPX2 ingress protection.

4.4 Safety information

This device is intended for professional use only. Please read carefully through the user
manual before starting up the equipment. It contains important information concerning the
installation, correct use and maintenance of the equipment. The manufacturer will not be
liable if the user does not observe the following instructions: When using electrical
components with higher safety requirements, you must follow the corresponding
regulations. Never carry out work on the device while it is carrying live voltage.
There are no special personnel requirements - the display unit can be used anywhere. This
product is not designed for use in critical environments (CT, defibrillators). It is not for use in
environments where there is a risk of explosion. The mains-operated display unit must be set
up so that it can be easily disconnected from the mains power (ensure that the socket is
accessible). The display unit should be protected from moisture.
This device has interference suppression in accordance with the related EC guideline
2014/30/EC. However, the display reading can be affected by extreme electrostatic or
electromagnetic interference, for example if a radio or mobile phone is used immediately
beside it. If affected in this way, the device should return to normal function once the
source of interference is removed. However, it may be necessary to switch off and on again.
If there is permanent electrostatic interference, please contact your service partner.
This device is a measuring instrument. Drafts, vibrations, rapid temperature changes and
direct exposure to sunlight may affect the weight readings.
The scales conform to protection class IPX2. Avoid high levels of air humidity, steam,
aggressive fluids and heavy soiling.
Improper installation will invalidate the warranty. The electrical connection conditions must
be consistent with the rating values printed on the power adapter. The equipment is
designed to be used indoors. Note the permitted ambient temperatures for operation (see
Technical Data). This equipment meets the requirements for electromagnetic compatibility.
Do not exceed the maximum values specified in the standards. If used correctly, there is no
danger of other equipment being affected by this product. The service life of this product is
36 of 164
www.soehnle-professional.com