Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
SEARCHING/SKIPPING
Direct search (specifying a desired track number)
Specify the track number using numeric buttons 0 to 9.
For track number 3, press
.
3
For track number 12, press
1
If the first of two digits pressed is not one of the digits on the CD, it is
interpreted as 1 digit and the search will start after about 0.5 second.
If you make a mistake when pressing the numeric buttons:
Press the right buttons to enter the correct track number.
• If you specify a track number which does not exist on the disc, "No
Track" will appear on the display. Enter the correct number.
Track Skip
If the loaded disc is a CD-TEXT disc and the display is presently in the
text display mode, press the
TIME
mode.
Next (skipping to a desired track located after the
currently playing track)
Press the
button the necessary number of times to skip to the
desired track.
Previous (skipping to a desired track located
after the currently playing track)
When pressed during playback, the CD player returns to the beginning
of the current track and plays the track again.
To skip to the previous track to the current track, press the
twice. To skip to a track located before the previous track, press the
button for the necessary number of times to skip to the desired
track.
• Pressing the
button twice in the middle of the first track in a disc
skips to the last track, and pressing the
of the last track skips to the first track.
Index Skip (
)
This is a convenient function which allows to search the desired index
during playback of a track with indexes recorded in it (see the descrip-
tion of the INDEX buttons on page 6).
• When an index number that does not exist in the disc selected, the
display shows "No Index" and playback restarts from the begining of
the original index.
, then, within 1.5 seconds, press
button to switch it to the time display
button in the middle
AMS (Listening to the first part of each track)
1. Press the
AMS/HIGHLIGHT S.
.
2
TTL
1 2
The first part (first 10 seconds) of each track in the disc will be played in
the order in which the tracks are recorded.
2. When you find a track you want to listen to, press the
button again. (The PLAY indicator stops blinking and starts to light
steadily.)
• If the
or
CD player increases or decreases the played track number for the
same number of times as the number of times the button was pressed,
but the AMS operation is not canceled.
Highlight Scan
When the loaded disc is a CD-TEXT disc containing the recording of
highlight information, pressing the
the Highlight Scan operation in precedence over the AMS operation.
TEXT 1 2
Pressing the
AMS/HIGHLIGHT S.
the AMS operation.

REPEAT PLAY

1-track repeat
button
(repeated playback of one track only)
While the track you want to repeat is playing, press the
twice.
The "RPT" and "1" indicators light up and the current track will be played
repeatedly.
To cancel 1-track repeat play:
Press the
REPEAT
All-track repeat
(repeated playback of all tracks on the disc)
During playback, press the
The "RPT" indicator lights up and all the tracks on the disc are played
repeatedly.
Even if the
REPEAT
and repeat playback will be carried out.
To resume normal playback:
Press the
REPEAT
mode is cancelled and normal playback resumes.
A-B repeat
(repeated playback of a specified passage)
1. During playback, press the remote control unit's
starting point of the passage you want to repeat."A" (starting point)
indicator lights up.
2. Press the
A – B
repeat. "B" (stopping point) indicator lights up.
The designated passage A-B will be played repeatedly.
To cancel A-B repeat play:
Press the
button, The "A" and "B" indicator goes out, A-B repeat
A – B
is cancelled and normal playback resumes.
8
button during stop or playback.
Blinks.
TRK
3 4
5 6
7 8
9 10 11 12 13 14 15
button is pressed during AMS operation, the
AMS/HIGHLIGHT S.
3 4
5 6
7 8
9 10 11 12 13 14 15
button during Highlight Scan initiates
button once.
button once.
REPEAT
button is pressed in stop mode, playback will start
button twice. The "RPT" indicator goes out, repeat
button again at the end of the passage you want to
AMS/HIGHLIGHT S.
button initiates
button
REPEAT
button at the
A – B

Publicidad

Tabla de contenido
loading

Tabla de contenido