Cleaning Your Appliance - TEFAL BL841140 Manual Del Usuario

CLEANINg YOUR APPLIANCE

• Before first use or to clean the appliance as indicated below:
- Open the appliance (fig 1) and fill the jug with 1.2 L of hot water from the
EN
tap (up to the MAX level) (fig 3). Do not add washing-up liquid to the jug.
- Put the top back on (fig 5) and plug it in (fig 6).
- Press the P4 Easy cleaning button (fig 10).
- When you hear the beep indicating the programme has finished, open the
appliance (fig 1), empty the water and rinse inside the jug (fig 11).
• Do not immerse the appliance in water. Do not place the motor unit (B) or the
jug (I) under running water.
• If necessary, once the appliance has cooled down, wash the blade under the tap
(fig 12) and finish by cleaning the inside of the jug and the motor unit with a
damp sponge.
• If there are still stains on the inside of the jug, leave it to soak for a few hours
in hot soapy water, then remove the residue with a plastic scourer.
• Rinse the bowl.
• Be careful when you remove the motor unit (B) and when cleaning the blade,
which is extremely sharp.
• To clean the outside of the motor unit (B) and the walls of the jug (I), use a
damp cloth. Dry carefully.
• Do not put washing-up liquid in the jug while the easy-cleaning programme is
running (risk of overflowing during the cleaning cycle).
• The appliance is not designed to be cleaned in a dishwasher.
WHAT TO DO IF YOUR APPLIANCE DOESN'T WORK
PROBLEMS
The appliance does
not work.
CAUSES
The plug is not
connected or switched
on at the mains power
socket.
The motor unit (B) is
not correctly positioned
or locked in.
22
SOLUTIONS
Plug your appliance into a
power socket. Ensure that the
power cord is correctly inserted
into the socket on the side
handle and mains socket.
Remove some
ingredients.
Check that the contents to not
exceed the MAX level and ensure
that the ingredients are spread
evenly over the base of the jug.
of the