Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION OF THE APPLIANCE
A.
Lid cap
B.
Lid
C.
Jug
D.
Removable silicone gasket
E.
Motor unit
F.
Brush
G.
Screen
CAUTION: The safety precautions are part of the appliance. Read
them carefully before using your new appliance for the first time.
Keep them in a place where you can find and refer to them later on.
The appliance will only start if the jug is correctly positioned on the
motor unit (E) and the lid locked on the jug.
BEFORE USING YOUR APPLIANCE FOR THE FIRST TIME
• Before using your appliance for the first time, rinse the parts that come into contact
with food (jug, lid and measuring cap) with soapy water
CAUTION : Do not immerse the appliance in water (neither the motor unit nor the
jug base). Never put the motor unit (E) under running water. Clean with a damp
cloth and dry it carefully.
The blades are extremely sharp and not removable.
• Make sure all the packaging has been removed before operating the appliance.
USING YOUR APPLIANCE
• Put the appliance on a flat, stable, heat-resistant surface away from sources of heat
or water splashes.
• Make sure the silicone gasket (D) is in place on the motor unit (E). Position the jug
(C) correctly on the motor unit Fig. 1 and 2.
• Add the ingredients into the assembled jug without exceeding the maximum level
indicated:
-
1750 ml max for cold preparation
-
1400 ml max for hot preparation
AUTOMATIC FUNCTION:
How to use :
• Lock the lid on the jug and place the lid cap in position on the lid and lock it by
rotating it. The appliance only starts up once the jug and lid are correctly in place.
• Plug in the blender. The product makes a beep and the screen lights up.
• The product will be immediatly in standby mode. At this stage you can select a
program by turning the program selector (l). The led will turn on on the selected
H.
Start/Stop button
I.
Program selector
J.
Pulse/Clean button
K.
Blend/Pause button
L.
Heat button
M.
Measuring cap
EN
5
Publicidad
Tabla de contenido
