Dörr DM-220 Manual De Instrucciones página 9

NOMENCLATURE AND FUNCTIONS
5
OPERATION
1. Open the battery compartment and insert a 1,5V AA battery (supplied). When inserting the battery respect the correct
polarity.
2. Turn the locking screw of the microphone hot shoe to the right, now slide the microphone on the camera hot shoe and turn
the locking screw to the left to fi x it.
3. Insert the 3,5 mm plug of connecting cable into the microphone input socket of your camera. When you turn on the microphone
now, it is ready for operation.
4. The microphone is for versatile purposes and provides an optional +10 dB amplifi er and 200 Hz bass fi lter.
SPECIFICATIONS
Transducer Principle
Directivity Characteristic
Frequency Response
Sensitivity
Selectable Amplifi er
Bass Filter
Output Impedance
Power Requirement
CONTENT
1x Dead Kitten / 1x Microphone / 1x Battery / 1x Instruction manual / 1x Pouch
3 2 1
7
6
8
Condenser microphone
Cardioid
50 Hz - 16 kHz
-38dB +/-3dB
+10 dB
10 dB/octave at 60 Hz
2000 Ohm +/-30%
1 x 1,5 V AA battery
1 Power switch: Push the
on the microphone; push the
button to switch it o again.
4 2 Sensitivity volume switch: Turns up the volume of
the microphone recordings.
3 Bass fi lter switch: Reduces the ambient noises by
switching on.
Power indicator: Turn on the power switch – the
4
indicator lights green;
When the battery is low, the indicator lights red.
Dead Kitten
5
6 Battery compartment
7 Microphone Hot Shoe
8 Shock mount: Reduces the mechanical noise of
cameras and other vibration noise
9
tbutton to switch
push the "OFF"