general notes
•
The unit is for personal use only and is not intended for medical or commercial
applications.
•
Please note that technically related measuring tolerances are possible, as the
scale is not calibrated for professional medical applications.
•
The scales' maximum load is 150 kg (330 lb/24 st)
•
Before submitting any complaint, irst check the batteries and replace them if
necessary.
•
Repairs may only be performed by the authorised customer services team.
•
All scales comply with EC Directive 2004/108/EC. Should you have any ques-
tions concerning the use of our devices, please contact your dealer or customer
service.
4
unit description
overview
1
Electrodes
2
Up button
up
3
On/Set button
on/set
4
Down button
down
5
Display
5
initial use
inserting the batteries
Please remove the battery insulating strips and/or position the batteries correctly with regards
to the polarity displayed in the battery compartment (as symbol
ate, remove the batteries completely and reinsert them.
changing the weight unit
The scale shows the values in kg. You can set the device to measure in kilograms [kg], or in
pounds [lb] and stones [st:lb], using the button at the back of the device.
setting up the scale
Set up the scale on a level and solid surface. A solid surface is a prerequisite for a correct
measurement.
18
1
2
3
4
5
). If the scale fails to oper-