TFA 30.3067 Instrucciones De Uso página 11

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
TFA_No. 30.3067_Anleitung_11_19
PALMA – Wireless pool thermometer
• Attach the display element by inserting the retaining lug into the slot
provided.
• Close the cover carefully.
• Pay attention to the sealing ring.
• On the display of the pool sensor appear the channel number 1 and
the temperature.
• Immediately after assembling the pool sensor, the display may
occasionally show -50 °C or an error message. Wait a few minutes
for the transmitter to adjust.
6.4 Outdoor values reception
• After the batteries are inserted, the measuring values of the pool
sensor will be transmitted to the base station. If the reception of the
outdoor values fails, "- - ,- °C" appears on the lower display of the
base station. Check the batteries and try it again. Check if there is
any source of interference.
• You can also start the outdoor transmitter search manually later on
(for example when the outdoor transmitter is lost or the batteries are
changed).
• Hold the CH button on the base station for three seconds. "- - ,- °C"
appears on the lower display. The reception symbol for the pool sen-
sor flashes. The base station will scan the outdoor values.
20
09.11.2019
15:29 Uhr
Seite 11
PALMA – Wireless pool thermometer
7. Maximum/Minimum function
• Press the MAX/MIN button.
• MAX appears on the display.
• You can now get the highest value for the indoor and pool tempera-
ture.
• Press the MAX/MIN button again.
• MIN appears on the display.
• You can now get the lowest value for the indoor and pool tempera-
ture. Press the MAX/MIN button again to return to normal mode.
• Press the CLEAR button during the highest or lowest values are dis-
played. The values will be deleted and reset to the current state.
8. °C/°F display change
• Press the °C/°F button in normal mode on the base station to change
between °C (Celsius) or °F (Fahrenheit) as temperature units.
9. Positioning and fixing of the base station and the pool sensor
• The base station can be placed onto any flat surface with the foldable
leg or wall mounted at a chosen location with the mounting hole,
both found at the back of the unit. Make sure to avoid the vicinity of
any source of interference such as computer screens, TV sets or
solid metal objects.
• The pool sensor floats on the water surface and measures the tem-
perature in a water depth of about 120 mm. You can fix the pool sen-
sor by the added fastening rope.
• Once the desired location is chosen, check whether the transmission
from the pool sensor to the base station is possible (transmission
range of up to 60m in open areas). Within solid walls, especially
ones with metal parts, the transmission range can be reduced con-
siderably.
• If necessary choose another position for the base station.
9.1 Additional transmitters, optional available
• For having more than one external transmitter, select different chan-
nels for each sensor with the switch (1-3) during set-up. The new
transmitter will be received automatically by the base station.
21

Publicidad

Tabla de contenido
loading

Tabla de contenido