Publicidad
English
To replace the fabric covering, ensure it is turned right side out, and
stretch the covering over the rear edge of the cheekpad assembly.
Then push the rectangular collar through the pad assembly and place
it in position. Stretch the rest of the covering over the front part of the
cheekpad assembly making sure to leave the tab outside the fabric
covering. Adjust the covering to lie smoothly.
To replace cheekpad in helmet, slip pad onto strap. Then place the tab at
Tab
the front into the slot on the helmet side. Push the rear part of pad until the
pad is fully home. Pull the chinstrap to check possible chinstrap play in the
cheekpad.
Tab
Slot
Slot
18
Publicidad
Capítulos
