Kohler K-9970 Guia De Instalacion página 3

Handle
Assembly
Sleeve
1. Change the Insets
Remove the handle assembly from the sleeve (hold the sleeve and
turn the handle counterclockwise).
Loosen and remove the two hex head screws from the underside
of the handle assembly.
Pull the strap off the top of the inset.
Position the new handle inset onto the inset holder.
Reassemble the handle assembly and screw the handle onto the
sleeve.
Kohler Co.
Strap
Inset
Post
3
Inset
Holder
Hex Head
Screws
111083-2-B