ENGLISH
2
The CH3SNAS Explained
Front View
2
3
1
Nr
Description
1.
Power LED/
Button
2.
HDD1/2 LED
3.
LAN LED
4.
HDD Eject Lever
5.
Power Connector Connect the provided AC power adapter.
6.
Reset Button
7.
LAN Port
8.
USB Port
Front inside view
2
Explanation
The steady Blue light indicates the server is powered on.
Press once to power on. Press and hold the button for 5 seconds to
power off
The steady Blue light indicates the hard disk drive(s) is connected
but inactive. When it blinks, the hard disk drive(s) is
reading/writing data. The steady Orange light indicates the hard
disk drive(s) failed.
The steady Blue light confirms that the server has a good
connection to your network. When it blinks, the storage server is
receiving/transmitting data from/to the network.
Use the lever(s) to eject the installed hard disk drive(s). The front
panel must be removed before ejecting the hard disk drive(s).
Press and hold for 5 seconds to restore the default setting.
Connect the server to the local network through the Ethernet cable.
Connect a USB printer.
1
2
4
4
22
Back view
5 6 7
8