Conceptronic Grab'n'GO Guía De Instalación Rápida página 28

ENGLISH
4.3 First Time HDD Configuration
When logging into the storage server for the first time, you will be asked to choose a
drive configuration and format the drives. There are four options: "Standard", "JBOD",
"RAID 0" and "RAID 1".
Standard
JBOD
RAID 0
RAID 1
1. When prompted, configure the
HDD settings by selecting
"Standard", "JBOD", "RAID 0" or
"RAID 1".
2. A warning message appears informing you that your drives will be formatted and
all data erased. Click "OK" to continue.
Note: If you selected "RAID 0" or "RAID 1", you need to assign the disk space which
will be used for the RAID configuration.
RAID 0 = Stripe Configuration
= Each drive is an unique volume.
= Combines both drives in a linear fashion to create 1 volume.
= Provides data striping (Maximum performance).
= Provides data mirroring over both disks (Maximum backup security).
RAID 1 = Mirror Configuration
28