Conceptronic Grab'n'GO Guía De Instalación Rápida página 29

ENGLISH
3. IMPORTANT!
The format of the Harddisk can
take a while, depending on the
chosen HDD configuration and the
capacity of the Harddisk. Do not
turn off or unplug the device
during format!
You will be notified when the
format is complete. Click
"Restart" to restart the Storage
Server. When the restart is
complete, you can continue with
the configuration of the Storage
Server.
Note: When the Harddisk(s) in the CH3SNAS are formatted, the device automatically
creates a share (or 2 shares when "standard" is selected during format) with
access to all users in your network.
To limit the access to your CH3SNAS storage, you need to setup user accounts and
adjust the shares access. See the User manual on the included CD-ROM for more
information about "Users", "Groups" and "Network Access".
Note: Do not remove the Harddisk(s) from the CH3SNAS when the device is in use! This
can cause data-loss!
29