Connecting The Ch3Snas Shares On Your Computer - Conceptronic Grab'n'GO Guía De Instalación Rápida

ENGLISH
6

Connecting the CH3SNAS Shares on your computer

When you have configured the CH3SNAS, you can connect the shares to your computer
for easy access through your explorer.
1. Run the Easy Search Utility from the CD-ROM.
2. When the utility is started, select the CH3SNAS in the "Search Device" field.
If the CH3SNAS is not shown yet, click the "Search Device" button to rescan for
the CH3SNAS.
3. When the CH3SNAS is selected, the available shares will be shown on the "Static"
section of the utility:
4. Select the share which you want to connect to your computer.
5. Select the drive letter that you want to assign to the selected share.
6. Click the "Mount" button.
Note: If you have a share which is protected by a username and password, you will see
a window requesting the username and password. Enter the Username and
Password and click "OK".
The selected share is will now be connected to the selected drive letter. You can now
easily access the share through Explorer or "My Computer".
If you want to disconnect your share, select the share from the sharelist and click
"Unmount". The share will now be disconnected from your computer.
Your CH3SNAS is now ready to use!
38