Description Of The Washing Machine And Starting A Wash Cycle; Control Panel; Indicator Lights - Hotpoint Ariston ARTXF 129 Manual De Instrucciones

Description of the washing machine
and starting a wash cycle

Control panel

GB
button with indicator light
ON/ OFF button with indicator light: switches the
machine on and off. If the indicator light is illuminated,
this indicates that the machine is switched on.
WASH CYCLE knob: programmes the wash cycles.
During the wash cycle, the knob does not move.
SPIN SPEED button: sets the spin speed or exclude
the spin cycle completely (see "Personalisation").
TEMPERATURE button: sets the temperature or the
cold wash cycle (see "Personalisation").
DISPLAY: indicates the time remaining for the selected
wash cycle and, if a delayed start has been programmed,
the time remaining until the start of the wash cycle.
CONTROL PANEL LOCK button with indicator light:
activates or deactivates the control panel lock.
FUNCTION buttons with indicator light: used to
select the available functions. The indicator light
corresponding to the selected function will remain lit.
WASH CYCLE PROGRESS indicator lights: used to
monitor the progress of the wash cycle. The illuminated
indicator light shows which phase is in progress.
DOOR LOCKED indicator light: indicates whether
the door may be opened or not (see next page).
START/ PAUSE button with indicator light: starts or
temporarily interrupts the wash cycles.
N.B. To pause the wash cycle in progress, press this
button; the corresponding indicator light will flash
orange, while the indicator light for the current wash
cycle phase will remain lit in a fixed manner. If the
DOOR LOCKED
door may be opened.
4
TEM PERATURE
ON/ OFF
WASH CYCLE
knob
indicator light is switched off, the
WASH CYCLE
PROGRESS
DISPLAY
button
SPI N
SPEED
button
CONTROL PANEL LOCK
button with indicator light
To start the wash cycle from the point at which it was
interrupted, press this button again.

Indicator lights

The indicator lights provide important information.
This is what they can tell you:
Wash cycle phase indicator lights
As the WASH CYCLE knob is rotated, the indicator
lights illuminate, indicating the stages which will be
performed by the machine in accordance with the
selected wash cycle.
Once the desired wash cycle has been selected and has
begun, the indicator lights switch on one by one to
indicate which phase of the cycle is currently in progress.
Wash
Rinse
Spin
Drain
End of wash cycle
Function buttons and corresponding indicator lights
When a function is selected, the corresponding
indicator light will illuminate.
If the selected function is not compatible with the
programmed wash cycle, the corresponding indicator
light will flash, a sound signal will be emitted and the
function will not be activated. If a function which is
incompatible with another function selected
previously, only the most recent selection will remain
active.
LID LOCKED
indicator light
START/ PAUSE
button with indicator light
FUNCTION
buttons
with indicator lights