Product Description And Specifications; Intended Use; Product Features - Bosch IXO Professional Manual Original

OBJ_BUCH-1384-005.book Page 12 Thursday, September 28, 2017 12:00 PM
12 | English
 Keep the battery charger clean. Contamination can lead to danger of an
electric shock.
 Before each use, check the battery charger, cable and plug. If
damage is detected, do not use the battery charger. Never open the
battery charger yourself. Have repairs performed only by a qualified
technician and only using original spare parts. Damaged battery
chargers, cables and plugs increase the risk of an electric shock.
 Do not operate the battery charger on easily inflammable surfaces
(e. g., paper, textiles, etc.) or surroundings. The heating of the battery
charger during the charging process can pose a fire hazard.
 Products sold in GB only: Your product is fitted with a BS 1363/A
approved electric plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be cut off and an
appropriate plug fitted in its place by an authorised customer service
agent. The replacement plug should have the same fuse rating as the
original plug.
The severed plug must be disposed of to avoid a possible shock hazard
and should never be inserted into a mains socket elsewhere.

Product Description and Specifications

Intended Use

The machine is intended for driving in and loosening screws.
The light of this power tool is intended to illuminate the power tool's direct
area of working operation and is not suitable for household room illumina-
tion.

Product Features

The numbering of the product features refers to the illustration of the
machine on the graphics page.
1 Screwdriver bit*
2 Tool holder
1 609 92A 41K | (28.9.17)
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Bosch Power Tools