ausdom M06 Manual De Instrucciones página 3

Wireless Headset English
4. Charging the headset
Attention: Fully charge the headset before using the
headset for the first time.Playtime varies according to
volume level and audio content.
Use the USB charging cable of the accessories provided to
charge the headset. Plug the smaller end of USB charging cable
into the Micro-USB interface on the right side of the ear cup; plug
the other bigger end of charging cable into the USB interface of
other power charging devices. When the battery is being charged,
the indicator turns red. It takes 3-6 hours to fully charge the
battery for the first time. Afterward, the charging time is 2-3 hours.
When the battery is fully charged, the indicator light goes off.
Note: You may use the Wireless function while charging the
battery. However, the M06 headset will take longer to be fully
charged. To use the audio cable while charging the battery, the
headset will automatically turn off. This will not affect the charging
duration. When the battery level is low, the M06 headset will issue
an audio reminder.
5. Power on and off
a) Power on: Press and hold the "Power on/off" button for about
2-4 seconds until an audio sound is heard and the LED indicator
flashes blue every second.
b) Power off: Press and hold the "Power on/off" button for about
3-5 seconds until an audio sound is heard and the LED indicator
flashes red for 1-2 seconds and then turns off.
6. Pairing with the Wireless
Steps before pairing
Attention: Prior to pairing with the headset, please be sure that
your desktop PC or laptop is equipped with Wireless functions. If
there is no Wireless function installed in the PC, you need to
purchase a Wireless adaptor of Wireless version 2.1 or later.
a. Pairing with the computer
1) Make sure the headset is in OFF mode;
2) Start the PC Wireless function to set device search;
3) The research output list will appear on the screen;
- 2-