ausdom M06 Manual De Instrucciones página 6

Wireless Headset
Attention: While listening to the music, if you answer an incoming
call or make a call, the audio media or music will replay after the
call is terminated.
4) State of the LED indicator
Charging the battery
the battery fully charged
Standby (before pairing)
Standby (after pairing)
During a call
Incoming calls
Battery level low
Pairing
8. Using the mobile phone or the M06 Wireless headset
* When there is an incoming call, a ring sound in the headset is
heard.
* Tag the "Power on/off" button to answer the incoming call. If you
press the answer button on the mobile phone to answer the
incoming call, music will stop accordingly.
* Tag the "Power on/off" button again to hang up the call or you
can press the hang up button on the mobile phone.
* Once the call is terminated, music will automatically continuously
play again.
9. Used as a wired headset
Plugging the 3.5mm audio cable to the left side of the ear cup, the
M06 headset can be used as a wired headset under certain
circumstances, such as during air travel, the headset battery with
no power, or the audio device without the Wireless function and
without pairing.
Note: The microphone can't work when using the headset as a
wired headset.
10. Warranty
The LED indicator turns red.
The Red LED indicator turns off.
The LED indicator flashes blue every second.
The LED indicator turns blue.
The LED indicator flashes blue twice every second.
The LED indicator flashes red twice every second.
The LED indicator flashes red.
The LED indicator flashes red and blue alternately.
- 5-
English