Control Instructions - ausdom Ah861 Manual De Instrucciones

Wireless Headset
The Headphone is held close to your ears, so loud sounds
pose a potential hearing risk. It is highly recommended that
setting low volume level before putting on the headphone and
avoiding exposing yourself continuously to high volumes. If
you need to use the headphone for a long period, rest ten
minutes for a half hour using.

10. Control Instructions

Function
Power On
Power Off
Increase volume
Decrease volume
Play media
Pause/restart
media playback
Skip to next track
Skip to previous track Long press V- button
Answer a call*
Reject a call*
End a call*
Switch the call
between a phone and
a headphone*
Answer a new call and
hang up the current call*
Keep the current call
and answer a new call*
Redial the last number*
Operation
Press and hold the power button 3 seconds.
And the LED flashes blue and sounds "Power
on". Then flashes blue every second.
Press and hold the power button 3 seconds. And
the LED flashes red and sounds "Power off".
Press the Volume V+ button
Press the Volume V- button
Press the power button
Press the power button
Long press V+ button
The LED flashes red twice every second and
press the power button to answer the call. Then
the LED flashes blue twice every second.
Press and hold the power button for 2 seconds
Press the power button
Press and hold the power button for 2 seconds
to switch the on line call between a phone and
headphone
Press the power button
Press and hold the power button
Press and hold the power button for 2 seconds
8
English