Setting Up The Product; Height Levelling - Steelcase Migration SE Manual Del Usuario

_______________________________________________________________
4
Actuator

4.7 Setting up the product

Setup and use of the product requires detailed
planning. For this Steelcase offers the services of a
separate planning department.
The partially-assembled components for the
Migration SE Desk & Bench product are generally
supplied via authorised dealers or directly from the
manufacturer.
The setup location must meet the following
requirements:
The floor must have sufficient load-bearing
■
capacity
Level placement surface
■
Temperature range: +5°C to +35°C
■
Max. rel. humidity: 80%
■

4.8 Height levelling

In order to compensate for uneven floors, you can
raise each foot by up to 1.0 cm with an adjusting
screw.
For a desk that has already been assembled: before
levelling, remove any objects from the desktop.
Fig. 4-2: Migration SE Desk height levelling
1 Adjusting screw
10
1
Transport and storage
1
Fig. 4-3: Migration SE Bench height levelling
1 Adjusting screw
153310