_______________________________________________________________
4
Actuator
4.7 Setting up the desk
Setup and use of the product requires detailed
planning. For this Steelcase offers the services of a
separate planning department.
The partially-assembled units for the Migration SE
desk are generally supplied via retailers or directly
from the manufacturer.
The installation location must meet the following
requirements:
The floor must have sufficient load-bearing
■
capacity
Level placement surface
■
Temperature range: +5 °C to +35 °C.
■
Max. rel. humidity: 80 %
■
4.8 Levelling
To compensate for uneven ground, you can raise
each foot by up to 1.0 cm with an adjusting screw.
For a desk that has already been assembled: before
EN
levelling, remove any objects from the desktop.
Fig 4-2: Migration SE levelling (the illustration of "Ology Desk"
serves as an example)
1
Adjusting screw
10
Transport and storage
153310