Functions Of The Training Computer - CAPITAL SPORTS 10035533 Manual Del Usuario

FUNCTIONS OF THE TRAINING COMPUTER

• Use the MODE button to select between the functions.
• Press and hold the RESET button for 2 seconds to clear the time, distance
and calories.
Press MODE to access the SCAN function. The display
SCAN automatically changes every 6 seconds between all
available function displays.
SPEED Display of the current speed.
Display of the training distance. Press MODE to access
the DIST function. Then press SET to set the distance.
DIST
When the distance is counted down, an alarm sounds
for 10 seconds.
Display the training duration. Press MODE to access the
TIME TIME function. Then press SET to set the time. When
the time counts down, an alarm sounds for 10 seconds.
Displays the total distance travelled (since startup.
ODO
Cleared when the battery is changed).
Display of calories burned so far. Press MODE to access
the CAL function. Then press SET to set the calories.
CAL
When the calories are counted down, an alarm sounds
for 10 seconds.
The training computer will automatically turn on at the
AUTO ON/OFF beginning of the workout and will automatically turn off
after the unit has not been used for 4 minutes.
Note: Replace the batteries with new 2 batteries type AA when the display
decreases.
EN
27