Short press INFO/MENU button to view information about the current station, Text information, program type, set name,
channel information, EQ type, battery level, time and date.
Saving a FM station as Preset
Press and hold the PRESET button to enter the radio station preset-store interface. Rotate SKIP to move the preset-store
position up and down. Rotate "SKIP button and ENTER to store the radio station to the current position
PRESET button to enter the radio station recall interface and then Rotate SKIP to select a preset-stored radio station. press
the ENTER button to confirm and play.
You also use the 0-9 number buttons on the remote control to select the preset-stored radio station for play.
Note: A total of 40 stations are available.
AUX mode
You can connect any audio device through the 3.5mm AUX in connector by the 3.5mm audio cable.
Playback USB/SD card
Power the PDR-051 on and press "MODE" button several times until USB (or SD) appears on the display and then you can
play music by inserting USB stick or Micro SD card songs with MP3, WAV, FLAC, WMA, APE.
Rotate VOLUME to adjust the volume Short press VOLUME to toggle mute on and mute off.
Rotate SKIP to switch Previous or next track rotate and hold skip button to rewind and fast forward the song short press the
ENTER to play or pause.
You also use the 0-9 number buttons on the remote control to select songs for playback.
During playback, Short press INFO/MENU to view the currently playing song information (song name, current track/total
track, current playing
time/total current track time date, etc)
Bluetooth mode
1. Short press the MODE button several times until "BT" appears on the display. After a few seconds it will display the text
"Disconnected". (if no device was paired before). The unit is ready for Bluetooth connections.
2. To connect your Bluetooth device, The first open the Bluetooth configuration on your smartphone or other Bluetooth
device, Then scan or search the device "Lenco PDR-051", click to connect with "Lenco PDR-051". The Bluetooth
connection will be made and your smartphone or other Bluetooth device can be used with your Lenco PDR-051.
3. Now you can use your favorite streaming service app or local music app on your smartphone or other connected
Bluetooth device to play music through the Lenco PDR-051 speakers.
4. You can short press ENTER to pause/play and use the SKIP+/SKIP- to play the next or previous song.
5. The volume can be adjusted with the VOLUME+/VOLUME- button. (please note that in most cases you first need to turn
up the volume to max on the connected smartphone or other connected bluetooth device)
Bluetooth hands-free call.
When receiving a phone call while Bluetooth music is playing, the music will stop. A ring sound will be heart and a message
will be displayed on the screen. Short press SKIP or the ENTER button to answer the call. The display will show 'HFP RUN'.
You can speak trough the internal microphone on the front of the PDR-051
To end the conversation, Short press SKIP or the ENTER button.
To reject an incoming call, long presses "SKIP" or "ENTER" when the call comes in.
Short press the
.
11
NOTE:
This product has a bluetooth reception function, you can not transmit any bluetooth sound with it: this means
that you can receive wirelessly a bluetooth sound signal from an external source like a smartphone.
Power supply adaptor (For EU only)
Use only the power supply listed in the user instructions.
Information
Manufacturers name or trade mark, commercial
registration and address
Model Identifier
Input voltage
Input AC frequency
Output voltage
Output current
Output Power
Average active efficiency
Efficiency at low load (10%)
No load Power consumption
Product Specification
Output power Max: 6W
S/N ratio:
Distortion:
Frequency Response: 100HZ-18KHZ
Audio input mode: DAB, FM, BT, USB, TF, AUX
Driver unit: 52mm internal magnetism (
/3W*2)
Battery: 18650 3.7V/1800mAh lithium-ion battery
USB/Micro SD maximum input sensitivity: 0dBm
DAB receive input sensitivity: -95dBm
FM receive input sensitivity: -105dBm
Working temperature: -10ºC-50 ºC
Storage temperature: -20ºC ~ +70 ºC
Unit size: 110mm/145mm/80mm
Net weight: About 760 g
1.
Guarantee
Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after
the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will
be voided.
Value and and precision
Shenzhen
Fushigang
Technology Co., Ltd
AS0601A-0500600EUU
100V~240V AC
50Hz/60Hz
DC 5,0V +/-5%
0,6A
3,0W
≥69,64%
≥61,05%
≤0,1W
12