Using Your Radio - Lenco PDR-051 Manual Del Usuario

Using Your Radio

Power on/off using DAB Mode for the first time:
When using The PDR-051 extend the antenna full for the best FM/DAB radio signal.
Shortpress STANDBY to turn on the radio to automatically enter the DAB mode. If this is the first time the radio has entered
DAB mode, it will automatically search for and store DAB stations which are available in your local area.
The radio will automatically synchronize time and date with the DAB signal found. After the search has finished rotate the
skip knob to select a station and press ENTER to confirm. The selected station will start to play.
FM radio
Press MODE to switch to Fm mode. In FM mode, press and hold the enter button to start autoscan which searches and stores
the radio stations found. If the reception signal should be adjusted, you can rotate SKIP +/- to adjust the frequency manually.
You can store youre favorite radiostation as preset by longpress the PRESET button. Rotate SKIP to select the preset number
you want to store it and then press ENTER to save it to the selected location. To select a previously saved preset, short press
PRESET to show the preset list, then Rotate SKIP to select the radio station frequency and press ENTER to confirm your
selection.
Standby:
Short press STANDBY to enter the STANDBY mode whilst using any playbackmode. When in Standby mode the display will
only show the time/date and (active) alarms set.
In Standby mode, you can press INFO/MENU to set the time, date, alarm and other settings.
To turn on the device again short press STANDBY again.
Long press STANDBY to turn the PDR-051 fully off. No time, date, alarm will be shown and the active alarms won't be
triggered.
NOTE: Only use the standby mode when the PDR-051 is connected to the mains poweradaptor.
Charging:
The PDR-051 can be charged while either powered on or off, It is recommended to use the supplied charger (output: 5VDC,
600mA) use the supplied micro USB cable for charging. The indicator LED light on the back is red when charging and the
indicator light is green when the battery is fully charged.
Menu Settings
In the different playback modes, you can long press INFO/MENU to enter the menu settings of the active mode. Rotate SKIP
+/- to highlight a submenu item and press ENTER to enter the submenu. If there is only one menu in the sub-menu, press
ENTER to confirm the highlighted option. To return to the previous menu press INFO/MENU.
Setting the date and time manually
If the PDR-051 can't find a signal to synchronise the time automatic, you can set the time and date manually.
To do this press and hold INFO/MENU or press and hold ALARM&CLOCK, rotate SKIP to select Time/Date and press ENTER.
Rotate SKIP to adjust the date. Press ENTER to confirm and then repeat to set the Month, Year, Hour and minute
After you've set the date and time the menu will automatically exit to the previous menu. The time/date you have set will be
saved automatically. Press "INFO/MENU" to return step by step or long press Info/Menu to exit the menu.
Auto Update/Set 12/24 Hour/Set Date Format options
Set Time/Date: Set Hour system, Set Date Format, Auto update
9
Set Time/Date Set Time/Date. o1-01-2021 0.0=00
Auto Update: Select Update from Radio or No Update
Set Hour System: Select 12Hour or 24Hour
Set Date Format: Select dd-mm-yyyy, mm-dd-yyyy, yyyy-mm-dd
Alarm clock Settings
To set the alarm clock short press clock ALARM to enter the alarm setting Intertace, Rotate SKIP to select alarm 1 or alarm 2,
3 or 4. After selecting the desired alarm short press the ENTER and rotate SKIP to select:
Time/Source/Repeat/Volume/ON/OFF setting options.
Time: Select the time by rotating SKIP and then press ENTER to confirm
Alarm time: 15/30/45/60/75/90/120 minutes
Source: FM, DAB, Buzzer, SD, USB
Repeat: There are Once/Daily/Weekends/Workday options
Volume: Select the volume value through rotating SKIP left and right.
Alarm ON/OFF: On/Off option; Press ENTER to confirm
alarm sounds, the sound is gradually increasing to the set volume. Short press ENTER button to adjust the snooze countdown
time and activate the snooze function; Short press STANDBY button to turn off the alarm when it is ringing
DAB Function
If the PDR-051 enters DAB mode for the first time the radio will automatically search for radio stations available in your local
area. If the radio has already searched for radio stations before, you can press and hold ENTER button to automatically
search for stations again
After the station search is completed, Rotate SKIP to move up and down the stations in the station list, Press ENTER to select
the station Rotate VOLUME to adjust the appropriate volume.
Short press VOLUME to mute/unmute.
Short press the INFO/MENU to view the current radio information text in- formation, signal strength program type, episode
name, channel number/frequency, signal error rate, bitrate, time and date etc.
Saving a DAB station as Preset
Press and hold the PRESET button to enter the radio station preset-store interface. Rotate SKIP to move the preset-store
position up and down. Rotate "SKIP button and ENTER to store the radio station to the current position
PRESET button to enter the radio station recall interface and then Rotate SKIP to select a preset-stored radio station. press
the ENTER button to confirm and play.
You also use the 0-9 number buttons on the remote control to select the preset-stored radio station for play.
Note: A total of 40 preset radio stations are available.
FM Function
Turn the PDR-051 on and switch to FM Radio mode
Long press the enter button to start autoscan, which searches and stores the radio stations found. Rotate skip to highlight the
saved radio stations and press ENTER to play the desired station
After setting, Press INFO/MENU to exit the alarm setting
.
Short press the
.
10
When the
.